How Does A Salt Chlornator Work?
To increase or reduce the chlorine level is not an easy job by your hand. As you must buy a packge of chemicals first, then transport it, store it, finally you need to add it into the pool by youself. Of course you have buy a chlorine level tester to get the accurate chlorine level of pool water.
Why we have to put up with it every time? We can use the better solution to manage the chlorine level. You got the same safety and sanitary pool, other wise , the pool water will be clean, soft and no harm to your eyes and swimsuit.
You maybe wonder how does this works?
When you have installed the chlorine generator in your pool, the only one thing you need to do is put a little common salt into your pool, the salt dosage can be found has described in the manual. Now the salt chlorinator will auto electrolysis the salt water and generate the chlorine which will sterilize the pool.
There is no need to worry about the salt level, which will be very low in your pool, and the chlorine will finally convert to the salt again, so we only waste a litte salt and get the clean and soft pool water indeed.
Why You Should Use Salt Chlorine Generator
To use chlorine to sanitize the swimming pool is popular and effective, But it is hard to buy and store chlorine, So the salt chlorinator emerged, Which can convert the common salt to sodium hypochlorite for sanitizing the pool and then re convert these into salt.
There are several reasons we choose the salt chlorine generator not other sanitizer, We have listed some below.
1. You spent no extra fees on the whole circular salt water system except the some common salt expenses.
2. No need to add chlorine and maintaince the chlorine level any more. No need to buy and store chlorine any more, As we know that chlorine will hurt the skin and eyes.
3. It's not hassles to maintaince the salt chlorinator, you should clean the the cell periodically for smooth functioning of the salt water system.
How To Troubleshoot a Salt Chlorine Generator
To pinponint the source of the failure can help you solve the problems by youself.
At First, you need check the phosphates and make certain that the cyanuric acid is up to par If needed, buy the PhosFree treatment and get the reading below 100 PPB.
After external checks, we need figure out the problem inside of chlornator. First thing is checking the power source and ensure that it is getting power, Not working? check to see if the chlorinator control unit has either a reset button or an internal fuse. push the button or blow the fuse, it can be good now.
Second, you should check if the cell is working well. It's not difficulty to do if your chlorinator has a clear cell, if not, as we all know most brands have cells that last about 8,000 hours, some better brands will install the longer life time like 25000 hours, check it and you can find your cell if end of it's life or not.And you can send to a pool store near to test the cell and ask for a pool water quality test.
At last, closely examine the electrical connections between the cell and the control and between the flow switch (if present) and the control. Make these clean and dry.
How many hours does the pump run every day?
1. Each pump requires sufficient running time of the circulating pump so that the water in the tank passes through the filter approximately 1.5-2 times per day.
2. The running time of the pump should normally be at least one hour every ten degrees outside.
3. That is, the temperature peaks at 90 degrees, and the pump is operated for at least 9 hours.
For more questions, kindly contact us by email or through the live chat.
Do you offer OEM?
Yes, we offer, when you reach the MOQ, we will offer OEM.
Why should i choose you?
Ningbo CF Electronic Tech Co., Ltd. is professional manufacture on pool technology, we are focus on salt chlorinator,pool pumps, automation over 16 years.
How can i get warranty
We have warranty website for your loading.
Each model we have error code.